How to Remove Rust From Shower Rod

I totally understand how it feels to have rusty components in your bathroom. Well, the shower rod is also a growing spot for rust because of how damp your bathroom is. But don’t fret, because I can show you how to remove the rust in the simplest way possible.

To eliminate rust, the most common approach is to use aluminum foil and scrub it against the affected area. But there are alternative approaches as well, such as using sandpaper, Coca-Cola, anti-rust spray, rust removal gel, baking soda, and other items.

Let’s dive into the article so I can show you the step-by-step procedures for removing the rust!

A Step-By-Step Guide for Removing Rust From the Shower Rod

To begin the process, you must first ensure that the area you’re working on to remove the rust is clean and free of any debris. To do so; 

  1. Wipe the shower rod with a wet cloth to get rid of any grime. Then you’ll need aluminum foil and vinegar to remove the rust. The following is what you can do;
  2. Cut the aluminum foil into a couple of little pieces.
  3. Coat the foil in vinegar. Now, when you work with the aluminum foil and vinegar on the rod, be careful because you don’t want to scratch the shower rod.
  4. Scrub the affected area of the rod gently.
  5. Use a clean cloth to remove the vinegar from the rod. Finally, you want to seal the rust and make your shower road look glossy. Therefore, don’t skip these final, important steps.
  6. On your shower rod, rub some automobile wax on it thinly.
  7. Let it air dry.
  8. Wipe it off for a gleaming finish, and you’re done with your shiny and spotless shower rod!

» Also read: What Are the Causes of Rust in a Toilet Tank?

5 Alternative Ways to Remove Rust From a Shower Rod

#1 Sand Paper

Sand paper is an excellent alternative for removing rust from a shower rod.

Simple steps like wrapping the sandpaper over the rusted area and rubbing it back and forth while rotating it will get the job done.

The rust will eventually fade.

#2 Aluminum Foil and Coca-Cola

You’ve probably seen videos on the internet of people using coke as a toilet cleaning agent. Let me assure you that it is effective.

Coke includes carbonic acid, which is a very useful property for rust dissolution.

Here’s how you can go about it:

  1. Let a cloth soak in the coke.
  2. Rub the shower rod with the soaked cloth.
  3. Lightly scrub the foil on the rod over the coke.
  4. Scrub it till the rust is gone.
  5. After the rust has been removed, use a wet sponge to clean the rod.
  6. Finally, dry the rod and you’re good to go.

#3 Anti Rust Spray

Using an anti-rust spray is without a doubt one of the most effective and time-efficient ways to eliminate rust from a shower rod.

It is quite simple to use. Simply spray it on the rusted area, allow it to sit for a moment, and then wipe it off with a wet sponge.

However, before applying the anti-rust spray to the shower, make sure it is completely dry.

#4 Rust Remover Gel

A rust remover gel is another alternative.

The gel must first be applied to the rust. Allow it to sit for 10 to 20 minutes before wiping it away with a clean cloth.

You may easily remove the rust from your shower rod by carrying out this rather simple technique.

#5 Baking Soda

Last but not least, baking soda also removes rust from the shower rod quite effectively. Here is how to use it to remove rust step by step:

  1. First, rinse the shower rod. 
  2. Add some baking soda to it.
  3. Scrub the rod with a wet scrubbing pad to get rid of the rust.
  4. Keep doing so until all rust has disappeared.
  5. Use a wet sponge to wipe it clean.

How Can You Prevent Rust on the Shower Rod?

Cleaning and maintaining the shower rod on a regular basis, coating it with a dry coat, or applying oil are all ways to prevent it from rusting. Another method is to avoid letting the rod get wet for too long because, if not dried completely, it can add to rust.

Routinely Cleaning

Metal rods, as mentioned above, are a growing spot for rust; therefore, it is crucial that you clean them properly to prevent having to clean them in various ways in the future to remove the rust.

Apply oil

Oil application is a very efficient technique. It lubricates the shower rod and produces a protective layer against rust.

When oil is applied, it forms a protective layer that prevents moisture from getting to the rod, preventing rust.

Dry Coat

Another technique to avoid rust is dry coating. For dry coating the shower rod, you can use specific commercial products. It provides a protective layer, much as the oil does.

However, in my opinion, it is a preferable approach to practice because it leaves no residue and even your metal rod won’t change in appearance or texture.

» Also read: How to Remove Rust Stains from Toilet Bowl?


Make sure to put the techniques into action in order to avoid getting rust in the first place. Nevertheless, there is no need to panic if you still notice rust on your shower rod because you are aware of how to remove it.

Leave a Comment