the tank<\/a> in your bathroom can be as low as $250 to $500.<\/p>\n\n\n\n3. Rodding Method<\/h3>\n\n\n\n Rodding a toilet costs about $150- $400 and is typically used when there is a large clog in the pipes. It is possible to use rods on all kinds of lines, and because the rods are strong, they can break through tree roots easily. Rodding involves pushing flexible rods of various sizes through pipes to move, break clogs, and get the water flowing normally again. Rodding is recommended for large pipes because it allows you to clear more areas within a short time by using large rods. Thanks to their strength, flexibility, and durability, it makes they are perfect for destroying roots.<\/p>\n\n\n\n
4. Removing Your Lavatory <\/h3>\n\n\n\n Taking a commode apart will take a lot of time. Most plumbers charge from $200 – $550 to complete this job. As a rule of thumb, anything that takes longer will cause additional costs to the client. If a pipe is clogged, the professional may need to remove the toilet, clean the clog and replace your toilet. However, this only happens when there’s a foreign object in the toilet base, or something gets stuck in the drain. Sometimes the clog is easy to fix by simply pulling out the blockage with a long pole or using a snake or an auger to remove it. This method of clog removal may cost more, but it might be the ideal option for some people.<\/p>\n\n\n\n
5. Hydro Jetting Method<\/h3>\n\n\n\n For a much more severe cleaning problem, the standard hydro jetting pipe cost is between $250 and $800. This allows you to quickly remove any trapped solid waste, soap, grease, hair, and other foreign substances that may have built up in your pipes. Hydro jetting uses high-pressure water, so it may not be perfect for old clogs or sewer pipes as they may fall apart under stress. Special nozzles push down on pipes to push out all the build-ups blocking them. If the clog is huge, the plumber can move the nozzle around the pipe to remove it. Nozzles can be designed in several ways, such as a chain flail, a penetrator, or a spinning rotary. Therefore, the plumber must determine if this method is the best way to clear a clog from your toilet.<\/p>\n\n\n\n
6. By Use Of Electric Snake<\/h3>\n\n\n\n It costs about $300 to $400 for a plumber to use an electric snake to fix a clogged toilet. However, it will depend on the type and the size of the snake that the plumber uses. Also, the time it takes to do the job might determine the total cost of unclogging your toilet.<\/p>\n\n\n\n
7. Open Sewer Pipe Cleaning<\/h3>\n\n\n\n Sometimes you will need to open the pipe completely to remove the blockage; it may cost you about $600 – $700 to do that. Clearing and unclogging a blocked toilet sewer pipe requires a camera to locate the blockage and remove any foreign or caked-on material. The sewer pipe is opened at the section that is near the clog. It can be messy, and a bit more work would be done, but sometimes that is the only option. If the pipe is clogged, get a precise diagnosis from your plumber to make sure that you do not have to do more work than is necessary.<\/p>\n\n\n\n
Costs Based On Your Location, Emergency, And Company<\/h3>\n\n\n\n Sometimes clearing a simple clog on a toilet costs $400-$650 or more based on your residence location, emergency, and the company you contact.<\/p>\n\n\n\n
DIY Option for Unclogging a Toilet<\/h3>\n\n\n\n Do-it-yourself efforts may cost as much as $10-$75 or even more. Using a flange, funnel cup, or ball plunger may cost $10-$25. Purchasing these tools can cost as much as $30 (on average). Meanwhile, a wax ring that’s brand new may cost between $2 and $10. Most homeowners report spending an average of $10 to $30 when unclogging an obstruction in their toilet. It also costs $22-$30 to rent an expensive snake that can clear your main sewer line \u2014 purchasing the snake typically costs about $55.<\/p>\n\n\n\n
Other Important Things to Include<\/h3>\n\n\n\n Use a funnel, ball-cup plunger, or flange to develop a perfect seal in your toilet. If you are having a hard time clearing a clog, use a toilet auger that can fit in a closet rather than a standard sewer pipe snake.<\/p>\n\n\n\n
For clearing the primary sewer pipe, a plumber will first locate a clean-out (typically by using a y-shaped fitting close to where the sewer line leaves your house) and then snake a long cable with a cutting head into the sewer line.<\/p>\n\n\n\n
Additional Costs<\/h3>\n\n\n\n Some plumbing companies may require to carry out a video inspection using a camera directed into the sewer line as it’s snaked. However, this service may be an extra cost ranging between $100 and $800. <\/p>\n\n\n\n
If your sewer line is permanently damaged, it may cost from $1,000 to $25,000. However, this will depend on the depth and length of the new pipe that should be replaced, local rates, and the type of the new plumbing pipe that will be bought. Most house owners who have done this have reported spending between $1,000-$2,200. Thus, the average cost is $1,533.<\/p>\n\n\n\n