Is It Safe To Put Fabuloso In the Toilet Tank?

Many households today use Fabuloso as an effective cleaner for floors, bathrooms, and even kitchens. In fact, in the recent past, there has been a “Fabuloso toilet hack” doing rounds on the internet. It’s highly praised for being a very effective toilet cleaning product that doesn’t require you to clean your toilet after every flush. Whether it truly works, as most consumers claim, there are certain reservations to consider. For example, is it safe to put Fabuloso in the toilet tank? In this article, we take you through a journey that details the cost-effectiveness and efficiency of the Fabuloso toilet cleaner.

Why Do People Put Fabuloso In The Toilet?

Putting Fabuloso in your toilet tank can potentially damage your toilet’s seals, gaskets, and plastic and rubber components. However, this is not to say that the cleaner isn’t an effective toilet cleaner. Many all-purpose household cleaners aren’t designed for cleaning toilets after all.

What Happens If You Put Fabuloso In The Toilet?

Using equal parts of white vinegar and baking soda in a toilet is cost-effective and effective in cleaning toilets. Add the ingredients to the septic tank, mix them well, and gently scrub the tank with a toilet brush to remove any odors. Let it sit for a few hours, then scrub it again and flush. Fabuloso functions in a similar way.

Because people just randomly do this trick, it’s easy to go wrong with it. You don’t want just to pour some cleaner from a bottle into your toilet because that will destroy everything in the tank. Moreover, you don’t want to uncap the bottle. Follow these steps when using Fabuloso in your toilet tank:

  • Cut a small slit on the side of the perfume bottle. It should be very close to the bottom of the bottle.
  • Put a full bottle of Fabuloso in the corner of your toilet tank, right in the middle of the toilet bowl.
  • Continue using your toilet as you normally would, and then change the liquid in the bottle as you normally would.

People who advertise this amazing hack say it makes the toilet smell amazing with every flush. You will notice that the water in their toilet smells amazing after each flush. You can see that the water has a blue tint from adding cleaner to it.

But are there any serious potential drawbacks to doing this? Unfortunately, you will have to pay for a new bottle after you flush the toilet several times.

Is It Safe To Use Fabuloso In Your Toilet Tank?

You may cause damage to your toilet tank over time if you keep using harsh cleaners. Fabuloso isn’t specifically made to clean toilet tanks. It’s made to kill bacteria and remove tough stains. You may think that cleaning the toilet tank with strong chemicals like Fabuloso can kill bacteria and help you clean all kinds of tough messes off the floor.

But there are powerful chemicals in the Fabuloso cleaner — and those powerful chemicals could cause serious damage to your toilet tank. Toilets are not built to allow chemicals that are so harsh, such as this, to seep into them constantly. It is possible that using harsh chemicals to clean your toilet can cause serious damage to other parts of your toilet. This includes your toilet valves and connections. Someday you will have to replace everything in your toilet if you want to keep using it.

Using Fabuloso in toilet bowl
Using Fabuloso in toilet bowl

Plastic and rubber components will take a while to show damage from harsh chemicals in this cleaner, similar to other toilet cleaners. But as you do that, you’ll reduce the life expectancy of your toilet. You could be held responsible for repair costs if you rent an apartment.

The idea of using this amazing tool sounds fantastic. Maybe it is. You flush the toilet, and the water is pumped into the bowl. It then flushes a specialized cleaning agent into the tank, which can easily clean the sides of the toilet bowl. 

The water that flows from your toilet cleans the sides of the bowl and keeps the air in your bathroom fresh and clean. That way, you don’t have to get your hands dirty trying to clean your toilet constantly. But remember, every toilet has a rating that shows how many gallons of water you can use per flush. 

Standard toilet designs use about 1.6 gallons of water with every flush. If your toilet is not powerful enough, you might need to clean it more often. If you put more water in a toilet, more water will flow down the drain and into the bowl. This creates more pressure, allowing you to flush more effectively and quickly to remove the liquid and solid waste in your toilet bowl.

Putting a bottle of Fabuloso into a toilet tank means that the amount of water the tank can hold will be less. In other words, you can reduce the volume by using a full-sized bottle of the Fabuloso cleaner, which is about 1.2 gallons. However, you’ll get less water in your toilet bowl, making the flush weaker and less effective.

Fabuloso isn’t meant to be directly poured into a toilet tank. There’s no indication of how long a Fabuloso bottle of toilet cleaner will last. The Tiktok hack that recently went viral doesn’t explain how much cleaner will go down the toilet with each flush or how often the user will need to change the bottle.

However, it was later revealed that a bottle of cleaner usually lasts about a week before it needs to be replaced. It can become very expensive very quickly, and it takes some time to get the right Fabuloso cleaner in the first place. It’s probably cheaper to just use a regular cleaner and a scrubber to do the job.

What Can I Put In My Toilet Tank To Make It Smell Better?

It is very cost-effective and very effective to use white vinegar and baking soda in an equal ratio to kill all the bad smells in a toilet. Add the mixture to the toilet tank, let it sit for a few hours, and then use a toilet brush to scrub the tank and flush the toilet.

Most people know how to avoid common bathroom smells. Eliminating bathroom odors is very easy but not always pleasant. Some days, it seems like some strange smell lingers in the bathroom despite the fact that it is usually cleaned. For instance, if the toilet bowl is clean and the shower head is cleaned, what’s that odd smell still lingering? What is that unpleasant smell that lingers in a bathroom after you have finished using the bathroom?

Cleaning toilet with vinegar
Cleaning toilet with vinegar

You may want to lift the lid on the toilet tank to access the inside. Many people don’t pay attention to the toilet tank, but the water sitting in it can cause unpleasant odors. These smells are often related to mold and mildew. Just ask your toilet tank leak repair team if they can help you clean the toilet tank. Although cleaning the toilet tank inside is easy, some people abuse simple methods by dumping harsh bleach inside the tank, causing it to break. So, what do you do if it turns out that the toilet tank itself is the culprit?

Here are a few ideas you should consider:

  • You can find a lot of simple odor eliminators in the cleaning aisle at most grocery stores.
  • It’s as simple as putting a vinegar-containing ball into a toilet tank and walking away.
  • Bleach can cause erosion of rubber parts in toilet tanks, such as seals and floats, which makes it less than ideal for cleaning toilet tanks.
  • A better approach is to use vinegar, liquid detergent, or baking soda as your cleaning agent.
  • Remember, rusty-looking stains on the toilet are caused by hard water that evaporates and deposits chemicals. These chemicals are hard to remove.

Wrapping Up

Using Fabuloso for your toilet cleaning duties is not inherently wrong. But, over time, you might end up damaging your expensive toilet unit, especially if you use it repeatedly. By using Fabuloso, you’ve already decided to reduce the flush power of your toilet, which could result in some solid waste sticking to the sides of your toilet bowl. You’ll end up brushing the sides regularly, which might be time-consuming, as well. Therefore, it’s best if you consider using products that the manufacturer has recommended and if Fabuloso is one of them, then you’re good to go.

Leave a Comment

%d bloggers like this: